Join the sleep revolutioN
It’s your bed – but longer!
The PillowShelf is an independent elegant item of bedroom furniture that can simply stand at the top end of your bed or can be fitted in place with or without a headboard using the spacers provided.
Most people are at least five inches longer than their height when laying down as their toes will extend when they roll on their side. The Pillowshelf lengthens your existing divan bed, allowing you to stretch out and sleep in comfort by fundamentally changing the way you sleep on your mattress. It supports the very top of your pillow allowing you to lay with your bodyweight supported in the centre of the mattress away from the reinforced edges under your toes.
We have three products available depending on your circumstances. For Single beds, 2’6” and 3’ (75cm and 90cm) wide we have the Single Adjustable (‘On the Grow’) model which has an adjustable height to suit a range of different divan beds.
For double beds from 4ft (120cm) up to 6ft (180cm) wide we have the Double Adjustable (‘On the Go’) variant which has an adjustable height to suit a range of divan beds up to King Size, or alternatively we have the Bespoke (‘Just for You’) variant which is assembled to a specific height, given the dimensions of the target bed. The Bespoke model does have some height adjustment, but it is reduced to 50mm and is simply to allow for personal preference when fitted.
All models are provided with Headboard spacers and a fitted sheet, the Adjustable models are both supplied with a carry bag for ease of transport.
Made in the UK from sustainably sourced lightweight wood, cushioned with a layer of foam and fully upholstered in a choice of four standard colours: Cream, Sand, Seal or Slate (see colour chart). Complies with all UK BS Safety Standards.
How It Works
Fitting the PillowShelf takes a few moments. Unfold the legs, adjust to the correct height for your mattress using the adjustable legs, and finally slide it in place at the head of the bed. You can connect it to your bed using the two headboard spacers which screw into the headboard securing locations provided as standard on all divan beds.
The ideal height for your PillowShelf is 1.5 – 2cm (3/4 inch) less than the height of your mattress depending on how firm it is. One of the winning elements of the PillowShelf is that its height can be adjusted to suit the individual. Even if you change your bed or mattress, or if your mattress settles, you can adjust the PillowShelf so that it is undetectable to the sleeper.
Fitting a Headboard
You don’t need to fit a headboard, but the headboard spacers allow you to attach the PillowShelf even with a headboard. Simply screw the headboard bolts into the other end of the spacers. Simple!
If you have a tall headboard you can order an additional set of spacers to allow for the four attachment points.
‘On the Grow’
The Single Adjustable (‘On the Grow’) model is provided for single beds, 2’6” and 3’ (75cm and 90cm) wide. It is provided in a carry bag, with headboard spacers and its own fitted sheet. The unit comes in all four standard colours and the legs fold in to enable the unit to be placed in the carry bag for transport or storage.
The legs are hinged and lock in place with small stays to keep them upright. Each leg is attached to an adjustable metal leg which provides six inches of adjustment. As with all PillowShelfs we assemble your order to suit your needs. On receipt of your order, we will contact you to identify the target beds to ensure that the unit built for you will suit your specific requirements.
The single adjustable model is particularly useful when you want to use it on various beds at home or away. Ideal for those growing teenagers, university students, spare rooms, dormitories, anywhere that requires a longer single divan bed.
‘Just for You’
The Bespoke (‘Just for You’) model is provided for double beds, 4’ to 6’ wide (120cm and 180cm). It is assembled to a specific height, given the dimensions of the target bed. The Bespoke model has some 50mm of height adjustment to simply allow for personal preference when fitted.
The unit comes in all four standard colours and for larger orders, the customer can specify their own colours prior to assembly. It is provided with headboard spacers and its own fitted sheet but does not include a carry bag.
The legs fold in and lock in the out position with a specially integrated reinforcement and locking stay mechanism. This allows the unit to be folded for storage and transport but the Bespoke unit is designed to suit a particular bed or range of beds identified at the time of assembly. A small adjustment of 50cm is offered using the screw in feet, allowing the user to adjust the height with regard to the mattress for personal preference.
Because the unit is designed for a particular bed, it is slightly easier to install but can’t so easily be transferred between beds and is not designed to be taken away to hotels and relatives. When the company receive your order for any of our PillowShelfs they will contact you to discuss your exact requirements and assemble the ideal unit for your need.